Installing Handle; Removing Handle; Installing Accessory Storage Bag - Craftsman 113.179715 Owner's Manual

Assembly (continued)
7. Using a rubber mallet or hammer,
gently tap the wheel cap onto the right
wheel until the wheel cap is firmly
seated onto the wheel. This is required
on both left and right sides.
Wheel
Cap
8. Insert the caster stem into the socket of
the caster foot as shown. (Front caster
only).
9. Push on the caster until the ball on the
caster stem is inserted all the way into
the socket. You will be able to hear the
ball snap into the socket and the caster
will swivel easily when positioning is
correct.
CaSt er Stern
aster Ball
Socket
Installing Handle
Press and hold release buttons while
installing handle into handle receptacles
in drum (See following illustration).
NOTE: An audible snap of release
buttons indicates successful engagement
of handle.
Release Buttons
Removing Handle
Press and hold release buttons as
shown. While firmly pushing in release
buttons, pull handle upwards to remove
(see illustration).
Installing Accessory Storage
Bag
1. Install accessory storage bag as
shown.
Bag zStorag e Bag
(4)
Handle
7