GE GTS18DBPFLCC Owner's Manual And Installation Instructions page 6

About the shelves and bins.
Not all features are on all models.
Rearranging the Shelves
Shelves in the refrigerator and freezer compartments are adjustable.
Refrigerator Compartment
Toremove:
O Tilt the shelf up at the ti'ont.
Liftthe shelfthe shelf UPout. at the back and bring
Some models have wire shelves that
can be adjusted in the same manne_
Toreplace:
_ While tilting tile shelf up, insert tile top
hook at the back of the shelf in a slot
on tile track.
I_ Lower the front of the shelf until the
bottom of the shelf locks into place.
Freezer Compar_nent
Toremove:
Lift up tile left side of the shelf and
slide it left into the center of the shelf
supports.
Rotate the right side of the shelf up and
out of tile shelf supports.
Toreplace:
Holding the shelf diagonally, insert the
left end of tile shelf into the center of
the lower shelf supports on the side
wall.
Insert tile right end of the shelf into the
shelf supports at the same level. Rest
each end of the shelf on tile bottom of
tile shelf supports.
34falking" the sheff
In rome models, mo_dng the shelf between
tile lower and tipper position may require
"walking" tile shelf as sho_ql. Lift tip the left
side of the shelf and slide it left into the
center of the shelf supports. Then swing the
right side upwards and insert it into the
NOTE:Formodelswith an automaticicemaker,
the freezershelf must be in the lower position for
the ice cubebucketto catch thecubes.
center of"tile tipper shelf supports. Slide tile
left side out of the shelf supports, swing it
upwards until level with the right side and
slide it into the shelf supports. Rest each
end of the shelf on tile bottom of the shelf
supports.
6
Spillproof Shelves
(on some models)
Spillproof shelves have special edges to
help prevent spills ti'om dripping to lower
shelves. To remove or replace the shelves,
see Rearrangingthe Shelves.