Download Print this page

Clock And Timer - GE JGRP20 Owner's Manual

Built-in
Hide thumbs Also See for JGRP20:

Advertisement

.==
Usingthe clock and timer.
Not all features are on all models°
:ii i I
Make sure the clack is set to the
correct time of day.
To Set the Clock
The dock must be set to the correct time
of clay for the automatic oven timing
functions to work properly The time of
day cannot be changed during a delayed
cooking or a delayed seN-cleaning cycle,
[]
Touch the TIMER/CLOCK pad twice,
[]
Touch the +or-pad,
If the + or - pad is not touched
Mthin one minute after you touch the
TIMER/CLOCKpad, the display reverts to
the original setting, If this happens, touch
the TIMER/CLOCK pad twice and reentel
the time of day,
[]
Touch the START pad until the time
of day sho_
in the display This
enters the time and starts the dock,
Tocheckthe timeof daywhenthedisplayis
showing otherinformation, simplytouchthe
CLOCK pad Thetimeof dayshowsuntifanother
pad istouched
To Turn Off the Clock Display
Kyou have several docks in your kitchen,
you may _sh to mrn off the time of day
clock display on your oven.
[]
Touch the TIMER/CLOCKpad once
to turn off the time of day display.
Although you will not be able to see
it, the clock maintains the correct
time of day
[]
Touch the TIMER/CLOCKpad twice to
recall the dock display,
tr_L_T01
The timer is a minute timer only,
The CLEAR/BFF pad does not affect
the timer,
To Set the timer
Thetimerdoesnot controlovenoperations
The maximum settingon the timeris 9 hours
and59 minutes
[]
Touch
the TIMER/CLOCKpad.
[]
Touch
the + or - pad until the
amount
of time you u_nt shows in
the display
The maximum
time that
can be entered
in minutes
is 59,
Times more
than 59 minutes
should
be changed
to hours and minutes.
tf yeumakea mistake, t ouchtheTIMER/CLOCK
padandbeginagain
[]
Touch the STARTpad, The time
MII start counting
down, although
the display does not change until
one minute has passed,
[]
V_en
the timer reaches :00, the
control _ll beep 3 times followed by
one beep every 6 seconds until the
TIMER/CLOCK pad is touched
To Reset the timer
If the display is still sho_ng
the time
remaining, you may change it by touching
the TIMER/CLOCK pad, then touching the
+ or -pad
unt!l the time you _mat
appears in the display,,
If the iemaining
time is not in the display
(clock, start time or cooking time are in
the display), recall the remaining
time by
touching the TIMER/CLOCKpad and then
touching the + or - pad to enter the new
time you want,
To Cancel the Timer
Touch the TIMER/CLOCK
pad twice,

Advertisement

loading