Craftsman 315.111810 Owner's Manual page 11

To preservenaturalresources,please
recycleor disposeof expiredbatteries
This productcontains nickel-cadmium
battery. Must be disposed of properly.
Local, state, or federal laws may prohibitdisposalof
nickel-cadmiumbatteries in ordinary trash.
Consultyour localwaste authorityfor information
regarding available recyclingand/or disposaloptions.
BATTERY REMOVAL, PREPARATION FOR
RECYCLING
See Rgurel_
TO REMOVE:
• Lock switchtdgger by placing the forward/reverse
switch in center position.See Figure 5.
• Remove end cap securing batteriesby twistingit
in the direction of the arrow as shown in figure 10.
• Slide batteriesfrom motor housing enough to
expose leads and battery terminals. Disconnect
leads from battery terminals. Note where each
lead connects to battery terminals. Connection
must be identicalwhen installing new batteries.
Note: Be careful notto break battery terminals
when disconnectingleads.
_k WARNING: Upon removal, cover the battery's
terminals with heavy duty adhesive tape. Do not
attempt to destroy or disassemble battery or
remove any of its components. Nickel-cadmium
batteries must be recycled or disposed of
properly. Also, never touch both terminals with
metal objects and/or body parts as short circuit
may result, Keep away from children. Failure to
comply with these warnings coutd result in fire
and/or serious injury,
TERMINAL
MOTOR
HOU_NG
TOREMOVE
ENDCAP
TO REPLACE
END CAP END CAP
BAKERY
LEADS
BATTERIES
BA'I'rERY
TERMINAL
Fig. 10 H
WHEN SERVICING, USE ONLY IDENTICAL CRAFTSMAN REPLACEMENT PARTS
Key Part
No. Number Description
1 974277-003 Battery Pack .
2 999555-001 Battery Charger
3 974385-002 Charging Stand
972000-446 Owner's Manual
11