GE AZ38H12DABM2 Owner's Manual And Installation Instructions page 22

Beforeyoucall forservice...
Problem Possible Causes What To Do
The air is notalwags The heat pump is not * Tiffs is normal. Tile he_=t pump will produce wm'm air
cool or hot during producing hot air. but not _s hot as air produced _dlen the higher-cost
operation electric beat is used.
O
The air does not feel
warm enoughduring
heating operation
The fan switches may be
set at continuous fan.
Tiffs causes tile tim to blow room temperature air
even when the
COlllpressor or
he:lter cycles elf.
Tile continuous air movement provides better
overall temperature control ill tile cool mode.
There is one switch fl_r cooling and one switch
fi)r beating.
The heat pump alone
produces air that feels
cooler than desired.
Use tile Electric Heat ()ption, Tiffs turns off tile
heat pmnp and warms with electric heat only,
NOTE: Uso of this option will result it) incroasod onorgy
consumption.
The unit is not
The fan dip switch may
* See the Auxiliary Controls section.
blowing out air be set to CYCLE.
The electric heating
feature does not work
The power cord is not
firmly attached.
o Remove tile romn cabinet and make sure that tile
yellow connector on tile end of tile power cord is
firmly engaged.
22