Installation Instructions; Preparation - GE AZ38H12DABM2 Owner's Manual And Installation Instructions

Installation
Instructions
Zoneline Air
Conditioners
Questions ? Call 800.GE.CARES (800.432.2737) or Visit
our Website at:
ge.com
I
BEFORE YOU BEGIN
Read these instructions completely and carefully.
• IMPORTANT
- S_,,e t he_e
inst_ uctions for local inspector's use.
• IMPORTANT
- Obse,,e _ ,,
governing codes and ordinances.
• Note to Installer
-
Be sure
to leave these
instructions with the owner
• Note to Owner - Keep
these instructions tor
fllttu'e reterence.
° Proper installation is the responsibility of the
installer,
• Product taihu'e clue to improper installation is not
covered trader the _arrantv.
TOOLS YOU WILL NEED
Phillipsscrewdriver
IMPORTANT ELECTRICAL
SAFETY--READ CAREFULLY
_k CAUTION:
• Follow the National Electrical Code (NEC) or local
codes and ordinances.
• For personal safety, this Zoneline must be properly
grounded.
• Protective devices (fuses or circuit breakers)
acceptable for Zoneline installations are specified
on the nameplate of each unit.
• Do not use m_ extension cord with this refit.
Aluminum building wiring may present special
problems--consult a qualified electricim_.
When the unit is in the OFF position, there is
still voltage to the electrical controls.
Discmmect the power to the unit before
servicing by:
1 Removing the power cord (if it has one) from
the wall receptacle.
OR
2 Removing the branch circuit fuses or turning
the circuit breakers off at the panel.
ZONELINE COMPONENTS
Exterior g rille/louver * *J
Wall case *f--_
Shipped with the Zoneline unit
Check the "Essential Elements" list on the unit
F Zoneline unit
m cabinet*
-Power supplykit....
12