Light Bulb - GE JKP90 Owner's Manual

27" and 30" double wall oven - microwave cooking center
Hide thumbs Also See for JKP90:
Table of Contents

Advertisement

Available languages

Available languages

GEApplianees.com
I
I SHOCKORBURNHAZARD.Before replacing oven light bulb, disconnect the electrical
A__ WARNING Iyer to the oven at t he m ain fuse or c ircuit breaker
panel Failure
to do so may result
in electric shock or burn.
I
I BURN HAZARD. Theglass cover and bulb should be removed when cool. Touchinghot glass
CAUTION
with bare hands
or a damp
cloth can c ause
burns
F{eceotacte
,SOCKet
Oven Light Replacement
_
G6.35Bulb
on some modets
Receotacle
SOCKeI
_GgBulb
Glasscover
(onsomemodels)
Toremove:
[77
Turn the glass cover
counterclockwise
1/4 turn until
the tabs of the glass cover clear the
grooves
of the socket. Wearing
latex
gloves may offer a better
g_ip.
_-]
Using gloves or a dry cloth, remove
the bulb by pulling it straight
out.
Toreplace:
[77 Use a new 120/130wolt halogen
bulb, not to exceed 50 watts.
Replace the bulb with the same
type of bulb that was removed. Your
model will have one of the two types
shown on the left. To detemdne
the
conect replacement
bulb, check the
bulb temdnals. Bulbs with 2 suaight
pin mmfinals are G6.35 bulbs. Bulbs
with 2 looped mmdnals are G9
bulbs.
(Do not interchange.)
Be sure
the replacement
bulb is rated 120
volts or 130 volts (NOT 12 volts).
Using gloves or a d D, clod1, remove
tile bulb flom its packaging. Do not
touch the bulb with bare fingei_. Oil
flom skin will damage the bulb and
shorten its life.
Push the bulb straight
into the
receptacle
all the way.
Place tile tabs of tile ,glasscover into
the grooves of the socket. Tmn the
glass cover clockwise :l/4 turn.
For improved
lighting
inside
file oven, clean file glass cover
fiequendy
using a wet cloth. This
should
be done when
die oven is
completely
cool.
[_
Reconnect
electrical
power to
the oven.
_ii!!
¸¸¸¸
,
,
kt
|
Glasscover
Lower Oven Light Bulb (onsomemodels)
Toremove:
Turn the ,glasscover counterclockwise
1/4 mm until the tabs of the glass cover
clear the grooves of the socket. Remove
the bulb.
Toreplace:
Put in a new 40-watt appliance bulb.
Place the tabs of the glass cover into the
grooves of the socket. Tmn the glass
cover clockwise 1/4 ram.
NOTES:
_, A 40-wattappliance bulbissmallerthan
a standard 40-watthousehold bulb.
Installandtightenthecoverclockwise.
Reconnect electrical p owerto theoven.
, Forimproved lightingbside theoven, c lean
theglasscoverfrequently usinga wet cloth.
This shouldbedonewhentheovenis
completely c ool.
37

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Jtp90

Table of Contents