Light Bulb Replacement - GE Spacemaker JVM1540 Owner's Manual

Light Bulb Replacement
40=watt incandescent
b. b c we3 xTooo3 ,
cEsepp/ie .
To replace tile bulb(s),
first disconnect tile power
at tile main fl_se or circuit
breaker panel or pull
the plug.
Remove the screw at the
flont of the light cover
and lower the cover.
Remove screw
3 Be sure the l)ull)(s)
to be
replaced are cool befk_re
removing. After l)reaking
the adhesive seal, remove
the bull) by gently turning.
Replace with the same size
and bpe bull).
4 Raise the light shield
and replace the screw:
Connect electrical power
to the oven.
/E
40=wa# incandescent
bulb (WBSeX10003),
CEs,pp ie,.
I To replace the oxen light,
first disconnect the power
at the main fl/se or circuit
breaker panel or pull
the plug.
2 Remo_e the top grille by
taking out the 3 screws
that hold it in place.
Screws
3 Remove
the light cover
located near the center
of the oven that holds
the l)ulb. After l)reaking
the adhesive seal,
remove the l)ull) by
gently turning. Replace
with the same size _md
tyI)e bull).
Light cover
4 Replace the light coxer.
5 Replace the grille and
screws. Connect electrical
power to the oxen.
33