Replacing The Light Bulb - GE JNM3161 Owner's Manual

Hide thumbs Also See for JNM3161:
Table of Contents

Advertisement

Available languages

Available languages

Replacing the light bulb.

Remove screws.
Replacing the Oven Cavity Lamp
1. Disconnect power at the main fuse or circuit
breaker panel.
2. Remove the top grill by removing the two
screws that hold it in place.
3. Remove charcoal filter if present. NOTE:
Charcoal filter is an optional kit, you may not
have one.
4. Press the retainer holding the lamp shield in
place.
About the exhaust feature.
Charcoal filter (on some models).
Reusable vent filters
(on all models).
Cooktop Lights/Nite Lights
Replace with 120 volt, 40 watt (max)
incandescent bulbs. Order WB25X10030 from
Convenience Cooking
Time
Popcorn
Beverage
Cook
your GE supplier.
Defrost
Potato
Reheat
Time/Weight
Timer
Express Cook
On/Off
1
2
3
Clock
4
5
6
Turntable
Surface
7
8
9
Light
Power
0
Add
Vent Fan
Level
30 Sec.
Start
Cancel
Pause
Off
Convenience Cooking
Time
Popcorn
Beverage
Cook
Defrost
Potato
Reheat
Time/Weight
Timer
Express Cook
On/Off
1
2
3
Clock
4
5
6
Turntable
Surface
7
8
9
Light
Power
0
Add
Vent Fan
Level
30 Sec.
Start
Cancel
Pause
Off
5. Pull the lamp shield out. Unscrew the
6. Return the lamp and lamp shield to original
7. Replace the grill and 2 screws. Reconnect
Vent Fan
The vent fan has two metal reusable vent filters.
Models that recirculate air back into the room
also use a charcoal filter.
Convenience Cooking
Time
Popcorn
Beverage
Cook
Defrost
Potato
Reheat
Time/Weight
Timer
Express Cook
On/Off
1
2
3
Clock
4
5
6
Turntable
Surface
7
8
9
Light
Power
Add
0
Level
30 Sec.
Vent Fan
Reusable Vent Filters
Start
Cancel
Pause
Off
The metal filters trap grease released by foods
on the cooktop. They also prevent flames from
foods on the cooktop from damaging the inside
of the oven.
For this reason, the filters must always be in
place when the hood is used. The vent filters
should be cleaned once a month, or as needed.
1
To replace the cooktop lights/nite lights, first
disconnect the power at the main fuse or
circuit breaker panel, or pull the plug.
2
One side at a time, remove the screw from
the side of the light compartment cover and
lower the cover until it stops.
3
Be sure the bulb is cool before removing.
Break the adhesive seal by gently
unscrewing the bulb.
4
Screw in the new bulb, then raise the light
cover and replace the screw. Repeat for the
other light. Connect electrical power to the
oven.
light bulb out and replace with the
120V-130V, 30W incondescent bulb. Order
WB25X10029 from your GE supplier.
position and replace charcoal filter.
power to the oven.
GEAppliances.com
EN-23

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents