Maintenance; Dust Extraction Hoods; Dust Extraction Hood For Plung Base - Craftsman 320.17543 Operator's Manual

DUST
EXTRACTION HOODS (Figs,, 26 and 26a)
There are dust extraction hoods Includedwilh each fouler base Eachhood is sized toaccept a
IVz-in vachose adapler, sold separatel_
Dust Extraction Hood for Ptung Base (Fig, 26)
To altach the hood onto the plunge base,
position and secure it Io the back of the base
with 1he lwo screws (included) as shown
{n Fig 26
The dust extraction hood can also be tnslailed
with the hose outlet facing to the trent of the
plunge bass by simply removing lhe chip shield
and atlachlng the hood at the Iront ot the bass
Dust Extraction Hood for Fixed Base (Fig, 26a)
To attachlhe head onlo theli×ed base,
pastlien and secureit fo the back el _hebase
with the two screws {included) as shown
in Fig 26a
Fig. 2Be 2 screwsincleded
per_sonZ_ WARNING: ALWAYS turn motor off and unplug router from power source }
1
before making any ad ustments or tnslalllng accessories. Failure to turn motor oft |
and unplug router could result In accidental starting which can cause serious |
I Injury. J
by a quaUfled service technician at e Sears Service Center,
GENERAL
Only the parts shown on the parts I_slare Intended for repair or replacement by the
customer, A{I other parts represent an Importontport of the double insulationsystem
and should be serv{ced onty be a qualtfled Sears service technician
35
"i ................................................................................................................................................................
17543