Tool Use And Care Safety; Electrical Safety - Craftsman 320.17543 Operator's Manual

TOOL USE AND CARE SAFETY
I L_ WARNING: BE SURE to read end understand all Instructions before
operating these reuters. Failure to follow all instructions listed below may result
In electric shock, fire andtor serious personal injury.
1 ALWAYS use clamps or other practical ways to secure and support the workplace
to a stable platform, Holding the work by hand or against your body Is unstable and
may teed to loss of control
2 DO NOT force the tool. Use the correct tool and bit lor your application. The correct
tooland bit w]!l do Ihe Jobbelier and safer at the rats for which II Is designed
3 DO NOT use the tool It switch does not turn ii "On" or"Off", Any tool 1halcannot be
controlled v_ththe switch Is dangerous and must be repaired
4 DISCONNECT the plug from the poWer source before making any adjustments,
ehanglng accessories or storing the tool. Such preventive safety measures reduce
the risk of starling the tool accidentally
5 NEVER leave the tool running. ALWAYS turn It oft_ DO NOT leave the |eel unll_it
comes toa compie{e slop
6 STORE Idle tools out of the reach of chlfdren end other untrained parsons_ Tools
are dangerous In the hands of untrained users
7 MAINTAIN tocls wtth cara. Keep cutllng tools sharp and clean
Prepedyma_nta_ned
toolswith sharp cutting edges are less likely to bind and are easier to central
8 CHECK for mlsallgnmant or binding of moving parts, breakage of parts, and any
other cond_tion {hat may affect the too_'soperation if damaged, have the too{ serviced
before using Many accidents are caused by poorlymaintained tools
g USE ONLY accessories that are recommended for this tool. Accessories that may be
suttable for one toolmay become hazardouswhen used on another tool
ELECTRICAL SAFETY
I Z_ WAR NING:
Do not permit fingers to touch the terminals of plug when ] tnstamng or removing the plug from the oulIet.
J
1 Double insulated tools are equipped with a polarized plug (one blade Is wider
than the other).Thls plug will fit In a polarized outlet only one way. If the plug
does not {it fuily in the culler, reverse the plug If it sili_ does not fit, contact aquailfled
electrician to Install a polarized outlet Do net change the plug In any way
2 Double Insulation [] eliminates {he need for the three-wire grounded power
cord and grounded power supply system, Applicable onty to Class II (double-insulated)
toots This router motor fs double Insulated,
Z_ WARNING:
Double Insulation DOES NOT take the place of norms! safety |
precautions when operating this tool
J
5
17543