Troubleshooting Tips - GE EGR2000 Owner's Manual & Installation Instructions

,O
m _
w
m _
i)iii!_iiiiiiii)ii)i_ii_ii_)_iii
JJ)L)J)L)J)L<J)L)J)L)J)L)
q_
Before you call for service...
Troubleshooting -tips
Save time and money! Review the charts on the following
pages first and you may not need to call for service.
Topburnersdonot light
or do notburnevenly
Possible Causes What To Do
Plug on range is not completely "
inserted in the electrical outlet.
Burner hole or slits on the side
of the burner may be clogged.
Make sure electrical plug is plugged into a live, properly
g_ounded outlet.
Remove fl_e burners (on models wifl_ smnda_d t_dn
buvne_s) or burney heads and caps (on models with
sealed burners) and clean them with a staving needle
or twist-tie. Make sure you do not enlarge the holes.
On sealed buvne_ models, check and dean the elecuode
area fo_ bushe&on food o_ grease.
Improper burner assembly. • Make sme the burney parts ave instaUed coHectly.
See the Care and cleaning of the range section.
Burnerflamesvery
Improper air to gas ratio. • If _vmge is connected to LP gas, contact the pe_son
large oryellow who installed yore _mge ov made the conve_ion.
Surface burners light The oven gas shut-off valve * To check the oven gas shut-off valve on sealed bmne_
but oven does not
may have accidentally been models, remove the wamaing dvaweh storage (hawex o_
moved during cleaning or kick panel (see fl_e
Careand cleaning of the range
section)
moving, mad look for the gas shut-off lever at the back of the range.
Controlsignals after
entering cooking time or
start time (onsome models)
Lever is
shownclosed
PULL TOOPEN.
Sealed burner models
• To check fl_e oven gas shut-offvalve on standa_d twin
burney models, valse the cookmp and look for the gas
shut-off lever at the extFeme right _eav cornel Follow
the directions in box A o, B that match your regulator
tTpe.
_eU_L_Lr iT_O s_ _ cI°_A
Standardtwin burnermodels
You forgot to enter a bake
temperature or cleaning time.
Standardtwin burnermodels
• Touch the Bake pad and desired tempe_m_ve ov
the Self Clean pad and desired
clean time.
Clock and timer Plug on range is not completely * Make sure electrical plug is plugged into a live,
inserted in the electrical outlet, properly grounded oudet.
(on some models)
A fuse in your home may be • Replace the fuse o_ _eset the circuit b_eake_.
blown or the circuit breaker
tripped.
Oven controls improperly set. • See the Using the clock and timer secdon.
46