Table of Contents
Advertisement
SPECIFICATIONS
Blade Diameter
Blade Arbor
CuttingDepth at0° Bevel C ut
CuttingDepth at45° Bevel C ut
5-1/2in.
NoLoadSpeed
3,800/min.
3/8in.
Motor
14.4VoltDC
1-9/16 in.
ChargeRate
3 - 6 Hours
1-1/8in.
Charger R ating
120volts,60Hz,AC
KNOWYOURTRIM SAW
See Figure
1.
Before attempting to use any tool familiarize yourself
with all operating features and safety requirements.
Features include easily operated bevel cut and depth
of cut adjustment mechanisms;
positive 0° bevel stop;
spindle lock; and blade wrench storage.
SWITCH
See Figure
1.
Your saw is equipped with a lock-off button which
reduces the possibility of accidental starting. The lock-
off button is located on the handle above the switch
trigger. You must depress the lock-off button in order
to pull the switch trigger. The lock resets each time
the trigger is released. Note: You can depress the
lock-off button from either the left or right side.
_
RIP
GU'DEsSC%
BLADEWRENCH
BLADEWRENCH _(5
mm HEXKEY)
STORAGEAREA k
SPINDLE
DEPTHOF
LOCKBUTTON
CUT ADJUSTMENT
(DEPTHADJUSTMENT KNOB)
BATTERY
PACK
RED
LIGHT
LOCK-OFF
BUTTON
CHARGER
CHARGING
STAND
RIP
GUIDESCREW
(WINGSCREW)
SWITCH
TRIGGER
UPPER
BLADEGUARD
BEVELCUT
ADJUSTMENT
(BEVEL ADJUSTMENT
KNOB)
BASE
ASSEMBLY
LOWER
BLADEGUARD
' BLADE
RIPGUIDE
Advertisement
Table of Contents
