Product Specifications; Lock-Off Button; Packing List - Craftsman nextec 320.10004 Operator's Manual

PRODUCT SPECIFICATIONS
Motor Voltage 12V DC
No load speed 2000SPM
Length of stroke 16mm
Blade type !T and U shank
Saw weight (without battery) 1.llbs
Battery type Lithium-ion
Battery Voltage 12V DC
Charging Adaptor Output 12.5 V
Optimum charging temperature 32°F (0° C) -104°F (40°C)
_i, WARNING: The safe use of this product requires an understanding of
the information included on the tool and in this operator's manual, as well
as knowledge of the project you are attempting. Before using this product,
familiarize yourself with all operating features and safety rules
TOOL-LESS BLADE CLAMP
The blade clamp design does not require the use of a tool (such as a blade
wrench) when installing or removing the blade.
LOCK-OFF BUTTON
The lock-off button reduces the possibility of accidental starting. The lock-off
button is located on the handle above the trigger switch. It must be depressed in
The LED worklight, located above the tool-less blade clamp, illuminates when the
trigger switch is depressed. This feature provides extra light for increased visibility.
a WARNING: If any part is broken or missing, DO NOT attempt to plug in
the power cord or operate the saw until the broken or missing part is replaced.
Failure to do so could result in possible serious injury.
a WARNING: Do not attempt to modify this saw or create accessories not
recommended for use with this saw. Any such alteration or modification is misuse
and could result in a hazardous condition leading to possible serious injury.
_, WARNING: To prevent accidental starting that could cause serious personal
injury, always disconnect the tool from the power source when assembling parts.
UNPACKING
This product has been shipped completely assembled.
• Carefully remove the tool and any accessories from the box. Make sure that
all items listed in the packing list are included.
• Inspect the tool carefully to make sure that no breakage or damage occurred
during shipping.
• Do not discard the packing material until you have carefully inspected and
satisfactorily operated the tool.
• If any parts are damaged or missing, please refer to the numbers listed on
the back page of operator's manual.
PACKING LIST
Multi-Saw,2pc Multi-purposeblades, 1pc on-board hex key, Operator'sManual.
10004 Manual_Revised_08-0813 Page 12 10004 Manual Revised_08-0813 Page 13