Carton Contents; Unpacking Your Miter Saw - Craftsman MULTI-MITER 137.242760 Operator's Manual

UNPACKING YOUR MITER SAW
IA WARNING I
To avoid injury from unexpected starting or electrical shock,
do not plug the power cord into a source of power during
unpacking and assembly. This cord must remain
unplugged whenever you are adjusting/assembling the
saw.
1,
Remove the miter saw from the carton.
IMPORTANT: Do not lift the miter saw by the switch
handle or miter table handle. It may cause
misalignment. LIFT ONLY BY THE BUILT-IN
CARRYING HANDLE LOCATED AT THE TOP OF
THE MACHINE.
.
3.
Place the saw on a secure stationary work surface.
Separate all parts from the packing material. Check
each one with the illustration below to make certain all
items are accounted for, before discarding any packing
material.
I,_b. WARNING I
If any part is missing or damaged, do not attempt to
assemble the miter saw, or plug in the power cord until the
missing or damaged part is correctly replaced. To avoid
electric shock, use only identical replacement parts when
servicing double insulated tools.
V
Extension Wing
Locking Screw
Dust Collector
Elbow
Extension Table
I
Stand Legs
Bottom (short)
bracket
Blade
Miter Table
Handle Wrench Dust Bag
,I
Safety Hold-down
Clamp
Bottom (long)
bracket
Top (short)
leg bracket
Top (long)
leg bracket
Stand Mounting
Hardware Bag
7