Using The Flash; Flashmode - FujiFilm FINEPIX F200 EXR Owner's Manual

Using the Flash (Intelligent Flash)
When the flash is used, the camera's Intelligent Flash system instantly analyzes the scene based on
such factors asthe brightness of the subject, its position in the frame, and its distance from the camera.
Flash output and sensitivity are adjusted to ensure that the main subject is correctly exposed while
preserving the effects of ambient background lighting, even in dimly-lit indoor scenes. Use the flash
when lighting is poor, for example when shooting at night or indoors under low light.
Choose a flash mode.
Pressthe selector right (_,). The flash mode changes each time the
selector is pressed;in modes other than AUTO, the current mode is indi-
cated by an icon in the display. Choose from the following options:
Mode Description
AIJTO (AUTOFLASH) The flash fires when required. Recommended in most situations.
Tile flash fires whenever a picture is taken. Use for backlit subjects or for natural
_. (FORCED FLASH) coloration when shooting in bright light.
Tile flash does not fire even when tile subject is poorly lit. t"" will appear in tile
(SUPPRESSED
monitor at slow shutter speeds to warn that pictures may be blurred. Use0% tripod
FLASH)
is recommended.
S._(SLOWSYNCHRO) Capture both tile main subject and the background under low light (note that
brightly lit scenes may be overexposed).
28