Dynamic Range - FujiFilm FINEPIX F200 EXR Owner's Manual

Using the*M<*nus: 5 hooting Mod<*
[] ISO
Control the camera's sensitivity to light. Higher
values can be used to reduce blur when lighting is
poor; note, however, that mottling may appear in
pictures taken at high sensitivities, particularly at
settings above 1600. If AUTO or an option such
as AUTO (3200) is selected, the camera will adjust
sensitivity automatically in response to shooting
conditions. In the case of AUTO (3200), AUTO
(1600), AUTO (800), and AUTO (400), the value
in parentheses is the maximum sensitivity that
will be selected when the subject is poorly lit.
Settings other than AUTO are
shown by an icon in the dis-
play.
DYNAMIC RANGE
Control contrast. Higher values are recommend-
ed for scenes that include both sunlight and deep
shade orfor increased contrast when photograph-
ing such subjects as sunlight on water, brightly-lit
autumn leaves, and portraits taken against a blue
sky; note, however, that mottling may appear in
pictures taken at higher values. If AUTO is se-
lected, the camera will automatically select values
between 100% and 400% in response to shooting
conditions.
• r Nete
I_ 800% is available only when _DYNAMIC
RANGE is selected in _ mode and an option
other than liar Velvia/VlVlD or Or ASTIA/SOFT is
selected for [] FILM SIMULATION.
62