Inserting The Battery - FujiFilm FINEPIX F200 EXR Owner's Manual

Table of Contents

Advertisement

Inserting
the Battery
After charging the battery, insert it in the camera as described below.
1 Open the battery-chamber
cover.
_r- Note
Be sure tile camera is off before opening the bat-
tery-chamber
cover.
[M Cautions
• Do not open tile battery-chamber cover when
the camera is on. Failureto observe this pre-
caution could result in damage to image files or
memory cards.
• Do not use excessive force when handling the
battery-chamber cover.
2
Insert the battery.
Insert the battery with the
terminals first and the or-
ange stripe aligned with
the orange battery latch.
Slide the battery into the
camera, keeping the bat-
tery latch pressed to one
side as shown below.
Confirm that the bat-
tery is securely latched.
B_s:eryI_:ch
[M Caution
Insert tile battery in tile correct orientation. Do
NOT use force or attempt to insert the battery up-
side down or backwards. Tile battery will slide in
easily in the correct orientation.

Advertisement

Table of Contents
loading

Table of Contents