Table of Contents
Advertisement
Now that both Windows and the printer have been configured to
use TCP/IP, the next step is to configure Windows to print to the
network printer.
W
2000
INDOWS
NOTE:
Windows 2000 requires administrator privileges.
With Windows 2000, there are four options for printing using
TCP/IP.
>
Manufacturers' LPR
>
Microsoft LPR
>
Port 9100
>
IPP
Manufacturers' LPR
Please follow the procedure described on
Microsoft LPR
NOTE:
In order to use Microsoft LPR, it must first be installed on your
system.
To install this port, proceed as follows:
1.
Select [Start], [Settings], [Control Panel and Printers].
2.
Open the [Printers] folder.
3.
Double-click [Add Printer] and then select [Next].
4.
Select [Local Printer], clear the [Automatically detect my
printer] check box, and then select [Next].
5.
Select [Create a new port] and then [LPR Port].
6.
Select [Next] and then provide the following information:
(a)
In [Name or address of server providing LPD] enter
the host name or Internet Protocol (IP) address of
the host for the printer you are adding.
(b)
In [Name of printer or print queue on that server]
type "lp".
Microsoft Windows> 56
page
50.
Hide quick links:
Advertisement
Table of Contents
