Olivetti d-Color P20W Network User's Manual page 19

SMTP Tab
This allows you to configure SNMP related items.
ITEM
Authentic
Community
TRAP
Community
TRAP
Address
SysContact
SysName
SysLocation
Default TTL
Enable
Authentic
Trap
EXPLANATION
This community name
is used to check
whether incoming
SNMP requests have
the correct community
name or not. The
community name is
displayed as ******
for security reasons.
This community name is assigned to outgoing system
traps such as cold start, authentication failure, etc.
Set a destination IP address of a Trap packet. If
0.0.0.0 is set, the Trap is disabled.
Set SysContact (printer manager) name.
Set SysName (printer model name).
Set SysLocation (the location where the printer is
installed).
Set TTL (Time To Live) value.
Set Authentic Trap to enabled/disabled.
Network Configuration> 19