What To Do When A Problem Occurs; Correct A Problem - Oce TCS400 Self Support Manual

What to do when a problem occurs

Correct a problem

When a problem occurs on your system, do the following
Use the wizards
1
Use the on-line / off-line key (key 4 on the folded cover) on the printer operator
panel to go off-line to the wizard selection screen.
Use the user manual on the documentation CD-ROM for detailed descriptions
2
about how to correct problems.
Use the wizards to correct problems
Use the wizards to do one of the following.
Use the 'Feed & cut' wizard to cut the output or to clean cut a roll of media.
1
Chapter 6 of the user manual includes complete information about how to use
this wizard.
Use the 'Change media type' wizard to change the media type defined on the
2
system. Define the correct media for optimal output quality
Use the 'Optimise print quality' wizard as a final option to correct the problems
3
with the print quality. (see 'Use the wizards to achieve optimal output quality'
on page 12)
Use the 'Replace printhead' wizard to replace a defective printhead. (see 'Use
4
the Replace printhead wizard to change a defective printhead' on page 14)
Use the 'Replace cassette' wizard to replace the maintenance cassette. Chapter
5
8 of the user manual includes complete information about this wizard.
Use the 'Configure system' wizard to check the network settings. When you do
6
not have a keyboard, mouse and monitor with your controller, you can also use
the 'Configure system' wizard to clear the set memory. Chapter 3 of the user
manual includes complete information about this wizard.
Use the user manual on the documentation CD-ROM to correct problems
When the information in this guide does not completely support you while you
use the Océ TCS400, refer to the user manual on the user documentation
CD-ROM for more information.
6 Océ TCS400 Self support guide