Oven Temperature; Oven Light - Frigidaire CPGS3085KF2 Use & Care Manual

ADJUSTING OVEN TEMPERATURE
The temperature in the oven has been pre-set at the
factory. When first using the oven, be sure to follow
recipe times and temperatures. If you think the oven
is cooking too hot or too cool for the temperature you
select, you can adjust the actual oven temperature to be
more or less than what is displayed. Before adjusting,
test a recipe by using a temperature setting that is
higher or lower than the recommended temperature. The
baking results should help you to decide how much of an
adjustment is needed.
The oven temperature adjustments made with this feature
will not change the Self=Cleancycle temperature or the Broil
temperature.
To adjust the oven temperature higher
1. Press BAKE for 6 seconds. "LIPO 0" (offset
temperature setting, 0 by default) will appear in the
display.
2. To increase the temperature use the number pads
to enter the desired change (Example 30°F) 30.
The temperature may be increased as much as 35°F
(19°C).
3. Press START to accept the temperature change
and the display will return to the time of day. Press
CANCEL to reject the change if necessary.
To adjust the oven temperature lower
1. Press BAKE for 6 seconds. "UPO 0" (offset
temperature setting, 0 by default) will appear in the
display.
2. To decrease the temperature use the number pads to
enter the desired change (Example -30°F) 30 and
then press SELF CLEAN to toggle the minus sign.
The temperature may be decreased as much as 35°F
(19°C).
3. Press START to accept the temperature change
and the display will return to the time of day. Press
CANCEL to reject the change if necessary.
OVEN LIGHT
The oven is equipped with 2 oven lights. The oven lights
will turn on automatically, when the oven door is opened.
The oven light may be turned on when the door is closed
by using the oven light pad located on the control panel.
The oven light key will toggle the lights at full intensity.
To toggle the Oven Lights ON and OFF:
1. Press OVEN LIGHT _,
The interior oven lights are covered with a glass shield
held by a wire holder. The glass shield must be in place
whenever the oven is in use.
To change the interior oven lights, see "Changing the
oven light" in the Care & Cleaning section.
The oven temperature adjustments are permanent and
will stay forever in the unit memory unless you manually
change it again. Even a power outage will not reset these
changes. Follow the same procedure again if you wish to
change it to a different setting.
ii ii!!