Frigidaire CPGS3085KF2 Use & Care Manual page 14

MINIMUM AND MAXIMUM CONTROL PAD SETTINGS
All of the features listed below have minimum and maximum time or temperature settings that may be entered into the
control. An ENTRY acceptance beep will sound each time a control pad is touched (the acceptance beep on the Oven
Lockout pad is delayed 3 seconds).
An ENTRY ERRORtone (3 short beeps) will sound if the entry of the temperature or time is below the minimum or above
the maximum settings for the feature.
!77°C 550OF/288°C
BAKE 170°F/77°C 550°F/288°C
/205oc 550OF/288°C
CONVECTION BAKE 300°F/149°C 550°F/288°C
CONVECTION ROAST
300°F/1490C 550OF/288°C
PIZZA 300°F/149°C 550°F/288°C
CHICKEN NUGGETS 300OF/149oC 550OF/288°C
TIMER 12 HF. Mode 0:01 Min. 11:59 Hr./Min.
24Hr. Mode 0:01 Min, 11:59 Hr./Min:
CLOCK TIME 12 Hr. Mode 1:00 Hr./Min. 12:59 Hr./Min.
Hr. Mode 0:00 Hr./Min: 23:59 Hr.iMin:
DELAY START 12 Hr. Mode 1:00 Hr./Min. 12:59 Hr./Min. :
24 Hr. Mode 0:00 Hr.iMin: 23:59 Hr./Min,
BAKE TIME 12 Hr. Mode 0:01 Min. 5:59 Hr./Min.
24 Hr. MOde O:01Min, 5:59 Hr.iMin'
SETTING THE CLOCK
The CLOCK pad isused to settheclock. The clock may
be setfor12 or 24 hourtime of day operation. The clock
has been preset at thefactory forthe 12 hour operation.
When the range is first plugged in, or when the power
supply to the range has been interrupted, the timer in the
display will flash.
To set the clock (example below for 1:30)
1. Press CLOCK. "CLO" will appear in the display.
2. Press 1 30 pads to set the time of day to 1:30.
"CLO" will stay in the display.
3. Press START. "CLO" will disappear and the clock will
start.
CHANGING
BETWEEN
12 OR 24 HOUR
TIME
OF DAY DISPLAY
1. Pressand holdSET CLOCK for6 seconds. "CLO" will
appear in the display.
2. CONTINUE holding the pad until "12Hr dAY" or
"24Nr dAY" appears in the display and the control
beeps once.
3. Press SELF CLEAN to switch between the 12 and 24
hour time of day display. The display will show either
"12Nr dAY" or "24Nr dAY".
4. Press START toaccept thechange or press CANCEL
to reject thechange.
5. Resetthecorrect t ime as described inTo set the
Clock above.Pleasenotethatif the 24 hour time
of day mode was chosen, the clock will now display
time from 0:00 through 23:59 hours.