Energy Saving; Setting Silent Control Operation - Frigidaire CPGS3085KF2 Use & Care Manual

SETTING CONTINUOUS BAKE OR 6 HOUR
ENERGY SAVING
The TIMER and SELF CLEAN pads control the
Continuous Bake or 6 Hour Energy Saving features. The
oven control has a factory preset built-in 6 Hour Energy
Saving feature that will shut off the oven if the oven
control is left on for more than 6 hours. The oven can
be programmed to override this feature for Continuous
Baking.
To set the control for Continuous Bake or 6 Hour
Energy Saving features
1. Press and hold TIMER for 6 seconds.
After 6 seconds "6Hr OFF" or "STAY On" will appear
in the display and the control will beep once.
2. Press SELF CLEAN to switch between the 6 Hour
Energy Saving and continuous bake features.
Note: "6Nr OFF" in the display indicates the control
is set for the 6 Hour Energy Saving mode and "STAY
On" indicates the control is set for the Continuous Bake
feature.
3. Press START to accept the change (display will
return to time of day) or press CANCEL to reject the
change.
SETTING TEMPERATURE DISPLAY =
FAHRENHEIT OR CELSIUS:
The BROIL and SELF CLEAN pads control the
Fahrenheit or Celsius temperature display modes. The
oven control can be programmed to display temperatures
in Fahrenheit or Celsius. The oven has been preset at the
factory to display in Fahrenheit.
To change display from Fahrenheit to Celsius or
Celsius to Fahrenheit
1. To tell if the display is set for Fahrenheit or Celsius
press BROIL and hold it for 6 seconds; "550 °"
will appear and "BROIL" will flash in the display
and a beep will sound. If"FAhrnht" appears, the
display is set to show temperatures in Fahrenheit.
If "CELSIUS" appears, the display is set to show
temperatures in Celsius.
2. Press SELF CLEAN to switch between Fahrenheit or
Celsius display modes. The display will show either
"FAhrnht" or "CELSIUS"
3. Press START to accept the change or press CANCEL
to reject the change.
SETTING SILENT CONTROL OPERATION
The DELAY START and SELF CLEAN pads control
the Silent Control operation feature. The Silent Control
operation feature allows the oven control to be operated
without sounds or beeps whenever necessary. If desired
the control can be programmed for silent operation and
later returned to operating with all the normal sounds
and beeps.
To change control from normal sound operation to
silent control operation
1. To tell if your range is set for normal or silent
operation press and hold DELAY START." .... "will
appear and "DELAY" will flash in the display. After
6 seconds "bEEP On" or "bEEP OFF" will appear in
the display.
2. Press SELF CLEAN to switch between normal sound
operation and silent operation mode. The display will
show either "bEEP On" or "bEEP OFF".
Note: If"bEEP On" appears, the control will operate with
normal sounds and beeps. If"bEEP OFF" appears, the
control is in the silent operation mode.
3. Press START to accept the change or press CANCEL
to reject the change.
Note" The control will always beep at the end of a
minute timer and will beep when a set temperature
has been reached, even if the control is set to silent
operation.