Setting Oven Controls; Setting The Clock; Changing Between Continuous Bake Or 12-Hour; Energy Saving Features - Frigidaire LGEF3043KF Use & Care Manual

SETTING OVEN CONTROLS

Setting the clock

When the appliance is first plugged in or when the
power supply to the appliance has been interrupted, the
display will flash "12:00". It is recommended to always
set the clock for the correct time of day before using the
appliance.
To set the clock:
1. Press once (do not hold pad down).
2. Within 5 seconds, press and hold the
the correct time of day appears in the display.
NOTE
The time of day cannot be changed when the oven or
self-clean is active.
Changing between continuous bake setting
or 12-Hour Energy Saving feature
The oven control has a built-in 12-Hour Energy Saving
feature that will shut off the oven if the control is left on
for more than 11 hours and 59 minutes. The oven can
be programmed to override this feature for continuous
baking.
Changing to continuous bake setting:
1. Press and hold
tone sounds, " — — hr" will appear in display for
continuous cooking. The current time of day will return
to the display.
2. To cancel the continuous bake setting, press
and hold for 5 seconds until a tone sounds.
"12hr" will appear in display indicating that the
control has returned to the 12-Hour Energy Saving
feature.
NOTE
Changing between continuous bake or the 12-Hour
Energy saving mode does not change how the cooktop
controls operate.
16
or until
down for 5 seconds until a
Changing temperature display (°F or °C)
The electronic oven control is set to display in °F
(Fahrenheit) when shipped from the factory. The oven can
be programmed for any temperature from 170°F to 550°F
(77°C to 287°C).
To change the temperature to display °C (Celsius)
or from °C to °F (control should not be set for Bake
or Self-clean when setting this feature):
1. Press . "— —" appears in the display.
2. Press and hold the
3. Press and hold
display.
4. Press the or to change °F to °C or °C to °F.
5. Press any control pad to return to normal operating
mode.
NOTE
The temperature display feature cannot be changed
when the oven or self-clean is active.
Setting a silent control panel
When choosing a function, a beep will be heard each time
a pad is pressed. If desired, the control can be programmed
for silent operation. Press and hold
the control will beep once. This will block the controls from
sounding when a pad is pressed. To return the sound, press
and hold again for 7 seconds until the control beeps
once.
until "HI" appears in the display.
until °F or °C appears in the
. After 7 seconds,