Craftsman 172.11625 Owner's Manual page 14

ATTACHING THE VACUUM HOSE ADAPTER (See Fig, 6)
Your sander includes a vacuum hose adapter that easily attaches to the
sander. The adapter allows you to hook your sander up to your shop vac
(sold separately),
I. Unplug the sander.
I /_ WARNING: Failure to unplug the sander could result in accidental I starting causing possible serious personal injury.
2. Remove dust bag assembly from the sander by firmly holding the adapter
and pulling it straight out.
3. Insert vacuum hose adapter into the dust exhaust hole.
4. Push in adapter until the raised edges on the top and bottom of the
adapter snap into the grooves in the dust exhaust hole.
5. Firmly attach the vacuum hose adapter to your vacuum hose.
6. Attach vacuum hose to vac.
Fig 6
Dust Exhaust Hole
""" acuum
e Adapter
14