Craftsman 315.114030 Operator's Manual page 11

BUILTqNCOUPLER
SeeFigure 4,
ThetooU hasa built-in coupUer. ThecoupUer hasbeen
designed t oaccept 1 /4in.hexbits.
COUPLER
mNSTALLmNG BiTS
m Lockswitchtrigger o nthetooU bypUacing thedirection
ofrotation seUector incenterposition. SeeFigure 2,
m SHde thecoupUer forward andhoUd i n position.
m Unsert bitstraight i ntocoupUer as shown in figure6.
m SfidethecoupUer backsUowUy andreUease.
BiT STORAGE
SeeFigure 5,
Whennotin use,bitsprovided withthetooU canbepUaced
inthestorage areaUocated at thebottmofthetooU handUe
asshowninfigure6.
BIT STORAGE AREA
REMOVINGBITS
m Lockswitch trigger o r thedrillby placing thedirection
ofrotation selector i ncenterposition.SeeFigure2,
m Slidethecoupler f orward andholdin position.
m Pullbitstraight o utofcoupler a s shown infigure6.
_ SCREWDRIVER
BiTS
Fig.5
11