When unpacking the took
m Carefully remove the tooUand accessories from the box.
m Make sure that aH items Hsted in the packing Hst are in-
m Inspect the tooUcarefully to make sure no breakage or
m Do notdiscard thepackingmateriaU until y ou have care-
fully i nspected and satisfactorily
mff any parts aredamaged ormissing, phase call
1/4 in. Impact-driver
2 standard bits and 2 accessory bits
If any parts are missing do not operate the tool until
the missing parts are replaced. Failure to do so could
result in possible serious personal injury.
The tool should never have battery installed when
you are assembling
parts, making adjustments,
cleaning, performing maintenance, or when the tool
is not in use. Disconnecting the battery will prevent
accidental starting that could cause injury.