Table of Contents
Advertisement
i I'_[ell]]_1_,,_]]l:ele_
PROBLEM
SOLUTION
The circular saw
does not work.
The blade does not
follow a straight
line.
The blade binds or
smokes
from friction.
CAUSE
Battery pack is depleted.
The battery pack is not installed.
Teeth are dull. This is caused
by hitting a hard object such as
a nail, dulling teeth on one side.
The blade tends to cut to the
side with the sharpest teeth.
Edge guide or straight
edge is
not being used.
Blade is dull.
Blade is on backwards.
Blade is bent.
Workpiece
is not properly
supported.
Incorrect
blade is being used.
Charge the battery
pack.
Install a charged
battery
pack.
Replace
blade.
Use an edge guide or
straight edge.
Replace
blade.
Install the blade
correctly.
Replace
blade.
Clamp the workpiece
correctly
and tightly.
Use the correct
blade.
31024Manual
Revised 11-0629
Page30
Advertisement
Table of Contents
