Advertisement
7. Troubleshooting.
_)
Engine will not start
t.
No fuel in fuet tank.
2.
Plug defective.
3.
Plug connection defective.
4. Dirt in carburettOr or fuel pipe.
Start motor will not turn engine
1. Battery flat.
2.
Poor contact between cable and battery,/pole.
3. Connection/disconnection level in wrong position.
4. Main fuse defective.
5. Ignition lock defective.
6. Safety contact for clutch/brake pedal defective.
7. Clutch/brake pedal not pushed down,
Engine runs unevenly
1. Gear too high.
2. Plug defective.
3. Carburattor incorrectly
set.
4. Air filter blocked,
5, Fuel tank ventilation blocked,
6.
ignition setting defective.
7. Dirt in fuel pipe.
Engine feels week
1. Air filter blocked.
2.
Plug defective.
3.
Dirt in carburettor or fuel pipe.
4. Carburettor incorrectly set.
Engineoverheets
1.
Engine ovedoaded,
2,
Air inlet or cooling fins blocked.
3,
Fan damaged.
4, Too little or no oil in engine,
5,
Ignition setting defective.
6, Plug defective.
Battery does not charge
1. Fuse defective.
2. One or several cells clefective.
3.
Poor contact between battery poles and cables.
Lighting
does not function
1.
Bulbs defective.
2. Switch defective.
3. Short-circuit in cable.
The machine
vibrates
1. Blades loose.
2.
Engine loose.
3, Unbalance in one or both blades resulting from damage
or poor balancing after sharpening,
Uneven cutting results
1. Blades blunt.
2. Cutting unit skew.
3. Long or wet grass.
4. Grass stuck under cover.
5. Different air pressures in lyres on left and dght side.
6.
Gear too high.
7,
Ddve belt slipping.
59
Advertisement
