Advertisement
UNPACKING
YOUR MITER SAW
IA WARNING
I
To avoid injury from unexpected starting or
electrical shock, do not plug the power cord into a
source of power during unpacking and assembly,
This cord must remain unplugged whenever
you are
working on the saw.
1. Remove the miter saw from the carton.
iMPORTANT:
Do not lift miter saw by the Trigger
Switch handle, it may cause misalignment. Lift
machine by the built-in carry handle.
2. Place the saw on a secure stationary work surface.
3. Separate all parts from the packing material. Check
each one with the illustration to make certain all items
are accounted for, before discarding any packing
material.
_,
WARNING
J
if any part is missing
or damaged, do not attempt
to assemble
the miter saw, or plug in the power
cord until the missing
or damaged
part is correctly
replaced.
To avoid electric shock, use only identical
replacement
parts when servicing double insulated
tools. Call 1=800=4=MY=HOME® for replacement
parts.
Hold-Down Clamp
Hold-Down Clamp Lock Knobs
_q'-_
Blade Wrench
Miter Saw
Miter Handle
Extension Tables
Screws
Dust Bag Elbow
Dust Bag
Short Bottom Support
Short Upper Support
Long Bottom Support
Foot Pads
Hardware Bag
>
Stand Legs
Long Upper Support
Batteries
Advertisement
