Craftsman 137.212521 Operator's Manual page 24

• Unplug your saw.
WARNING I
Failure to unplug your saw could result in accidental
starting causing possible serious personal injury.
1. Flip laser guide locking lever to left.
2. Use laser guide tab to pull out laser guide.
3. Lift open the battery guide cover (1).
4. Install two batteries with 1.5 volt AAA size.
NOTE: When replacing the batteries, the battery guide
should be thoroughly cleaned. Use a soft paintbrush or
similar device, to remove any sawdust and debris.
Fig. KK
24