Fisher & Paykel DD24 Series User Manual page 5

Safety and warnings
installation
This DishDrawer ®must be installed and located in accordance with the Installation k_structions
before it L_used. ff you did not receive fnstafiation k_struction sheets with your DishDrawer% you
can order them by calling your Authorized Service Agent or from the Fisher & Paykel website,
wwv_fisherpaykeLcom,
Installation and service must be performed by a qualified technician.
, ff the power supply cord is damaged, it must be replaced by a dealer or A uthoMzed Service Center
or a similar qualified trades person in order to avoid a hazard,
Ensure the DishDrawer ®Lssecured to adjacent cabinetu using the brackets provided, Failure to
do so may result in an unstable product, which may cause damage or k_juu,
Do not operate this appliance ff it is damaged, malfunctioning, partially disassem bled or has
missing or broken part._ including a damaged power supply cord or plug,
Do not store or use petrol or other flammable vapors and liquids in the vidnity of the
DishDrawer%
Connect to a properly rate4 protected and sized power supply circuit to avoid electrical overload,
Make sure that the power supply cord LSlocated so that it wilt not be stepped on, tripped over or
otherwise subject to damage or stress,
Do not install or store the DishDrawer ®where it will be exposed to temperatures below freezing
or exposed to weather°
Do not use an extension cord or a portable electrical outlet devke (e.g. multi-socket outlet box)
to connect the DishDrawer ®to the power supply.
This appHance must be grounded, ln the event of a matfunction or breakdown, grounding wHI
reduce the risk of electric shock by providk_g a path of least resistance for electric current, This
appliance
Lsequipped with a cord having
an equipment-grounding conductor and a grounding
plug, The plug must be plugged into an appropriate outlet that is installed and grounded
in accordance with all local codes and ordinances, WARNING - Improper connection of the
equipment-grounding conductor can result in a risk of electric shock, Check with a qualified
electrician or service representative if you are in doubt as to whether the apph%nce L_properly
grounded. Do not modit_v the plug provided with the appliance;: ff it will not fit the outlet, have a
proper outlet k_stalted by a quahWed technician,
ff the DishDrawer® is instaHed as a permanently connected appliance:
GROUNDING INSTRUCTIONS - This apph%nce must be connected to a grounded metal permanent
wiring system, or an equipment-grounding conductor must be run with the cffcuit conductors
and connected to the equipment-grounding terminal or lead on the appliance,