Operating
instructions
- Operation
1
Load dishes
Remove all food scraps and load the dishes.
2
Add detergent
S
Check rinse agent
4
Press the _
button
5
SeJect a wash program
The length of the wash program will appear
on the electronic
display (models with LCD
only).
6
SeJect ££O(optionat}
7
Check
Ensure there is nothing obstructing
the
spray arm. The drain filter must be level with
the filter plate.
8
9
Start
Close the drawer and press the H_ button.
Finish
The DishDraweP _ will beep six times to
indicate the end of the wash program.
At
the end of the wash program the drying fan
will continue
to run for a set time or until the
drawer is opened. The fan assists with drying
and uses negligible
amounts of energy. It
is normal for some water to remain in the
drain filter area after the wash program is
complete.
Double models only: At the end of a wash
program, you may find both drawers
draining
simultaneously.
This is normal.
2
3