Fisher & Paykel DD24 Series User Manual page 32

Fau t codes
How to recognize a fault code
When a fault has occurred, the DishDraweg will continuously beep every second.
The fault code will be displayed on the electronic display for models with LCDand on the wash
program selector for models with no LCD.
Eachfault code is shown in the following chart,
How to attend to a fault code
1 Press the O button to remove the fault code,
2 If the fault code and continuous beeps cannot be removed by pressing the O button, turn the
DishDrawe¢ '_off at the power supply,
3 We recommend you check the following chart and correct the fault where possible,
4 After attending to the fault, turn the DishDrawe¢ '_on at the power supply,
5 If the fault code and continuous beeps remain, turn the water and power supply off to the
DishDrawe¢<
6 When calling your Authorized Service Center, advise them of the fault code that has appeared
on the DishDrawegE This information will help the Authorized Service Center respond to your
request,