Electronic Display - Fisher & Paykel DD601-87225 Use & Care Manual

Electronic Display
rho Electronic Display hasa nul_/ber of functions. It
shows:
• The time lot each wash program selected.
Each time you change the wash program, the
ntiiTiber in the Electronic Display will change to _!\ _
indicate, the approximate duration of each wash ,> _,_@
program, rllo ",T,in" symbol will flash until a
wash program has started.
• Time remaining in the wash program.
This is shown with the background in green.
When the wash program has started, it will count
down in one minute increments, represented
by the "rain" symbol, rhe "rain" symbol will
remain and the "smiley l_tce" symbol will flash.
• Delay Start.
An orange background is shown. [t will count
down in one hour incroments when delay start
has been selected, rhe "HRS DELAY" symbol
represents the number of hours before, the
DishDrawer starts.
• Lock has been activated.
The "key" symbol will be shown at the bottom of
the Electronic Display.
• A Fault Code.
In the unlikely event of a failure, a l_tult code is
displayed and the background is red. (For more
iniormation Refer to Section on Fault Code
Displays.)
• Water heating is in progress.
The "HE" symbol is displayed, rhis means that
water heating is in progress due to incoming
water being too cold, a drop in tc, m perature
through the DishDrawer being opened during
the wash program, or the correct wash
temperature not having been reached, rhe wash
program times on the Electronic Display are
based on inlet water temperatures at 120°F.
Figure 3 - Electronic
Display showing Time
Remaining in a wash
program
Figure 4 - Electronic
Display showing a Fault
Code
Io