Advertisement
•
Assemble t headapter b racket t othedeckusing two
5/16" x 1-1/4" hexbolts,5/16" flatwashers and5/16"
nylock nuts. S eefigure 29.
NOTE:It maybenecessary t o useextra 5/16"flat
washers toshimunder thebracket n exttothedeck
surface. T enextrawashers havebeenfurnished as
shims.Seefigure29.
(2) 5/16" NYLOCK
i
@_
NUTS
)_---- (2) 5116"FLAT
WASHERS
ADAPTER BRACKET
5/16" x 1-1/4" _"_
HEX BOLT
5116" flat
washers
used as needed for
shims to adjust for
variations in decks.
FIGURE
29
With deck adapter positioned correctly over the
discharge opening, use the adapter bracket as a
template and drill three 9/32" diameter holes in the
top of the deck adapter. See figure 30.
Bolt deck adapter to bracket using three 1/4" x 1"
bolts, nylon washers, 1/4" flat washers and 1/4"
nylock nuts. Nylon washers should be against the
inside of the deck adapter. See figure 30.
DECK ADAPTER
_
(3) 1/4" NYLOCK
NUTS
BRACKET
WASHERS
(3) 1/4" STEEL WASHERS
(3) 1/4" x 1" HEX BOLTS
FIGURE
30
Assemble end of hose and a hose clamp over the
round opening of deck adapter and tighten clamp.
GO DIRECTLY TO THE OPERATION
INSTRUCTIONS
ON PAGE 18.
17
Advertisement
