Advertisement
Assemble a naxleclip, a wheel a nda 5/8"washer o nto
eachendoftheaxle. A ssemble a second 5/8"washer
ontoeachendoftheaxleifspace allows. Secure both
wheels inplaceusing twocotterpins. S eefigure 4.
5/8"
WASHER
WHEEL
\
AXLE
FIGURE 4
Assemble the latch stand plate and latch stand
bracket (with alignment tab toward rear of cart) to
the cart tray using four 1/4" x 3/4" hex bolts and 1/4"
nylock nuts. Tighten nuts after all bolts are in place.
See figure 5.
Place the cart bed braces and the cart tray onto
the wheel support. Secure latch stand bracket
underneath the tongue's latch lock lever. See figure 6.
Assemble the cart tray and cart bed braces to the
wheel support using eight 5/16" x 3/4" hex bolts and
5/16" nylock nuts. Tighten nuts after all bolts are in
place. See figure 6.
5/16" x 3/4"
HEX BOLT
/
CART
I
BED
BRACE
FIGURE 6
1/4" × 3/4"
HEX BOLTS
1/4" NYLOCK NUT
FIGURE 5
10
Advertisement
