Advertisement
Secure frontsupport t ubetotopsupport a ngle
using two1/4"x 1-1/4" hexboltsand1/4"locknuts.
TIGHTEN. Do not over tighten and collapse support
tube. See figure 19.
NOTE: Cart bag not shown for clarity.
I
/
FRONT SUPPORTTUBE
/
TOP SUPPORT ANGLE
.-
1/4" x 1-1/4" HEX BOLT
FIGURE 19
Place the front support rod on the outside
and the
lower support rod on the inside of the top angle
support. Attach using two 1/4" x 3/4" hex bolts and
1/4" lock nuts. TIGHTEN nut only until flush with end
of bolt. The rods must pivot freely. See figure 20.
NOTE: Cart bag not shown for clarity.
FRONT SUPPORT ROD
(STRAIGHT)
LOCK NUT
1/4" x 314" HEX BOLT
LOWER SUPPORT ROD
(BENT)
FIGURE 20
•
Assemble a 1/4" x 3/4" bolt and 1/4" lock nut to each
end of the second lower support rod. TIGHTEN, then
back nut off 1/2 turn. See figure 21.
•
Attach the lower support rod to the outside
of the top
support angle using two 1/4" flanged nuts. TIGHTEN.
See figure 21.
NOTE: Cart bag not shown for clarity.
FIGURE 21
LOWER SUPPORT
ROD (BENT)
.-'_"''"
114" FLANGED
\
\
NUT
114" LOCK
NUT
114" x 314"
HEX BOLT
Attach the braces to the front support tube using
two 1/4" x 1-1/4" hex bolts and 1/4" flanged nuts.
TIGHTEN. Do not over tighten
and collapse support
tube. See figure 22.
NOTE: Cart bag not shown for clarity.
114" x 1-114"
HEX BOLT
FIGURE 22
14
Advertisement
