Camera Volume Adjustment; Camera Lens Adjustment - NuTone VSUC4RK Installation Instructions Manual

Camera Volume Adjustment

The VSC4R door camera is provided with a volume level adjustment set screw. The adjustment has been pre-set at the fac-
tory to provide the optimal volume level at the door camera. The volume level can be adjusted if your specific application
requires the level to be either increased or decreased. Insert a jeweler's screwdriver into the small hole that is shown in the
camera illustration. Rotate the small set screw to adjust the volume level.
Important: Do not use excessive force to rotate the screw. Damage could occur to the camera, and loss of audio may
result. Use extreme caution when making the adjustment. Do not use a screwdriver that is too big for the application.
VSC4R
Volume Adjustment
Camera Lens Manual Adjustment
The VSC4R door camera is provided with a manual camera lens adjustment. The adjustment can be used to fine tune the
angle of the camera lens to compensate for installations that are not directly in line to the viewing area. The adjustment is
located on the back of the camera, as shown in the camera illustration. Move the adjustment control upward to lower the
camera lens. Move the adjustment control downward to raise the camera lens. The control can also be moved left or right to
adjust the side angle. Adjust the camera lens position to provide the best viewing area for your installation.
VSC4R
Lens Adjustment
18