Subscribe to Our Youtube Channel
Related Manuals for Altinex MULTI-TASKER MT104-107
Summary of Contents for Altinex MULTI-TASKER MT104-107
- Page 1 MULTI-TASKER MANUAL PART NUMBER: 400-0176-002 MT104-107 3-IN, 1-OUT DUAL VIDEO/S-VIDEO SWITCHER CARD FOR MULTI-TASKER USER’S GUIDE...
-
Page 2: Table Of Contents
7.2 DESCRIPTION OF COMMANDS ... 7 7.3 SUMMARY OF COMMANDS... 11 TROUBLESHOOTING GUIDE... 12 8.1 LED IS NOT LIT ..12 8.2 NO DISPLAY ..12 ALTINEX POLICY..12 9.1 LIMITED WARRANTY/RETURN POLICY ... 12 9.2 CONTACT INFORMATION... 12 Page ... 6... -
Page 3: Precautions / Safety Warnings
Please read this manual carefully before using your MT104-107. Keep this manual handy for future reference. These safety instructions are to ensure the long life of your MT104-107 and to prevent fire and shock hazard. Please read them carefully and heed all warnings. -
Page 4: About Your Multi-Tasker
S -Video sources to be connected and switched to a single display or recording device. The MT104-107 card utilizes solid state switching technology, and offers a video bandwidth of 350MHz. This bandwidth enables the MT104-107 to pass high-resolution video signals without degradation. -
Page 5: Product Description
MULTI-TASKER PRODUCT DESCRIPTION... -
Page 6: Application Diagram
MULTI-TASKER APPLICATION DIAGRAM Application 1... -
Page 7: Application 2: Internal View
Application 2: Internal View 3-IN 1-OUT VIDEO, S-VIDEO SWITCHER (BNC, 4-PIN DIN IN/OUT) INPUT S-Video Inputs 4-PIN MINI INPUT C-Video Inputs MULTI-TASKER MT104-107 INPUT SELECT CONTROL POWER OUTPUT 4-PIN MINI OUTPUT... -
Page 8: Installing Your Multi-Tasker
Cn = card ID (n = # from 1 to max slots) Ui = Unit ID (i = # from 0 to 9) Example: An MT104-107 card is in slot #2 of unit 3. Retrieve the card type and version by sending three parts: MT100 -100). - Page 9 Ui = unit id (i = from 0 to 9) Example: There is an MT104-107 card is in slot #2 of unit 3. S-Video Input 1 is ON and C-Video Input 3 is ON. To get the status of the card,...
- Page 10 Cn = card ID (n = slot # from 1 to max slots) = path Example: There are two MT104-107 cards in slot 6 and 7 of unit 3. Enable S-Video input 1 of card 6 and S-Video input 3 of card 7 simultaneously. Use...
- Page 11 Cn = card ID (n = slot # from 1 to max slots) = path Example: There are two MT104-107 cards in slot 6 and 7 of unit 3. Enable C-Video input 1 of card 6 and C-Video input 3 of card 7 simultaneously. Use...
-
Page 12: Summary Of Commands
Ui = unit number (i = # from 0-9) Example: To group cards #1, 2, and 3 as group 5 of unit #1, send the command [WRC1C2C3G5U1]. After executing this command, cards 1, 2 and 3 will be grouped together as group 5 of unit 1. 12. -
Page 13: Troubleshooting Guide
15) [CLM] Remove members from a group TROUBLESHOOTING GUIDE We have carefully tested and have found no problems in the supplied MT104-107; however, we would like to offer suggestions for the following: 8.1 LED IS NOT LIT Cause 1 Card cage is not plugged in.
Need help?
Do you have a question about the MULTI-TASKER MT104-107 and is the answer not in the manual?
Questions and answers