Related Manuals for Altinex MULTI-TASKER MT104-102
Summary of Contents for Altinex MULTI-TASKER MT104-102
- Page 1 MULTI-TASKER MANUAL PART NUMBER: 400-0092-005 MT104-102 6-IN, 1-OUT VGA SWITCHER CARD FOR MULTI-TASKER ENCLOSURES USER’S GUIDE...
-
Page 2: Table Of Contents
INSTALLING YOUR MT104-102... 6 OPERATION... 6 RS-232 CONTROL ... 6 RS-232 INTERFACE... 6 DESCRIPTION OF COMMANDS... 6 SUMMARY OF COMMANDS... 10 TROUBLESHOOTING GUIDE ... 10 ALTINEX POLICY ... 11 LIMITED WARRANTY ... 11 RETURN POLICY... 11 CONTACT INFORMATION... 11 MULTI-TASKER Page... -
Page 3: Precautions / Safety Warnings
MT104-102 and to prevent fire and shock hazard. Please read them carefully and heed all warnings. 1.1 GENERAL Qualified ALTINEX service personnel, or their authorized representatives must perform all service. 1.2 INSTALLATION To prevent fire or shock, do not expose this unit to rain or moisture. -
Page 4: About Your Mt104-102
Female 15-pin HD (VGA-type) connectors are provided for input and output. If used together with 15-pin HD to 5 BNC adapter cables available from ALTINEX, the MT104-102 can pass RGBHV format computer video signals as well. Inputs are selected via easy-to-use ASCII commands from a... -
Page 5: Product Description
PRODUCT DESCRIPTION APPLICATION DIAGRAM Application Diagram 1 MULTI-TASKER... -
Page 6: Application 2
MULTI-TASKER Application Diagram 2: Internal View of the MT104-102... -
Page 7: Installing Your Mt104-102
INSTALLING YOUR MT104-102 Step 1. Slide the MT104-102 into an available slot in the Multi-Tasker™ Enclosure in order to connect to the bus. Make sure that the MT104-102 card fits into place. Secure card tightening the retainer screws located on the top and bottom of the MT104-102 card. -
Page 8: Error Codes
Example: If one MT104-102 card is in slot #2 of unit 3: send command [VERC2U3], Tasker™ Enclosure will return feedback as: MT104-102 690-0158-003 2. [C] This command receives the status of the card. Command Format: [CnUi] Cn = card id (n = 1 to 19) (1-8 for MT100-101 or 1-4 for MT100-106) Ui = unit id (i = from 0 to 9) (refer to the MT100- 100 user’s guide for explanation) - Page 9 Example: If there are two MT104-102 cards in slot 6 and 7 of unit 3: To enable input 1 of card 6 and input 3 of card 7 simultaneously, use the following commands: [ON1C6U3P] [ON3C7U3P] [SW] If "F" is included use the [ONmCnUiPF] command or the [ONmCnUiFP] command.
- Page 10 [SW] The system will return feedback as OK if the unit ID is zero. 6. [WR] This command groups multiple cards in the MT100-100 Enclosure. Each unit contains a maximum of nine groups. Command Format: [WRCn…GkUi] n = card ID No. (n = slot # from 1 to 19) (1-8 for MT100-101 or 1-4 for MT100-106) k = group number (k = # from 1-9) i = unit number (i = # from 0-9)
-
Page 11: Summary Of Commands
LED lights, the problem is the card cage slot. The card cage may require service. Call ALTINEX at (714) 990-2300. If the other slots do not work and the LED is still not lit, see Solution 2. -
Page 12: Altinex Policy
If there is still no display, call ALTINEX (714) 990-2300. ALTINEX POLICY 9.1 LIMITED WARRANTY See Altinex Inc. web site for complete details. 9.2 RETURN POLICY See Altinex web site for complete details. 9.3 CONTACT INFORMATION ALTINEX, INC. 592 Apollo Street...
Need help?
Do you have a question about the MULTI-TASKER MT104-102 and is the answer not in the manual?
Questions and answers