Subscribe to Our Youtube Channel
Related Manuals for Altinex MX2414RM
Summary of Contents for Altinex MX2414RM
- Page 1 SWITCHERS MANUAL PART NUMBER: 400-0020-003 PRODUCT REVISION: 0 MX2416RM/MX2414RM 6/(4) - IN, 1 - OUT VGA/MAC SWITCHER USER’S GUIDE...
-
Page 2: Table Of Contents
This manual covers: MX2416RM – 6 – in, 1 - out VGA/MAC Switcher MX2414RM – 4 – in, 1 - out VGA/MAC Switcher MX2416RM PRECAUTIONS / SAFETY WARNINGS ...2 GENERAL ..2 RACK MOUNT SAFETY GUIDELINES ...2... -
Page 3: Precautions / Safety Warnings
Do not place heavy objects on top of the MX2416RM. If the MX2416RM is to a table or wall, use only an Altinex made mounting accessories like rack mount shelf DA1298RM or rack mount ears DA1299RM and cables for optimum setup. -
Page 4: About Your Switcher
TECHNICAL SPECIFICATIONS FEATURES/ DESCRIPTION GENERAL Inputs VGA Input Connector MAC Input Connector Outputs VGA Output Connectors MAC Output Connectors Compatibility Table 1. MX2416RM/MX2414RM General internally MECHANICAL RGBS, RGsB, Material Finish Top Panel Height (inches) Width (inches) Depth (inches) Weight (pounds) -
Page 5: Description Of Mx2416Rm
Typical Video Bandwidth 400 MHz @ -3 dB Horizontal Vertical DESCRIPTION OF MX2416RM -0.3V Cross-talk pass-through Coupling Power External Power Adapter Power Consumption 15-200 kHz Table 3. MX2416RM/MX2414RM Electrical 30-190 Hz SWITCHERS -48dB @ 10 MHz 90-140V/200-240V 12 watts max. -
Page 6: Select Input
The front panel of the MX2416RM provides access to essentially all of the switcher’s capabilities. In addition to standard switching functions, the unit has control and switching functions that could be very useful in a variety of special applications. 4.1 SELECT INPUT When buttons 1 through 6 are pressed, the corresponding INPUT... -
Page 7: Power Up Default Set
4.6 POWER UP DEFAULT SET This function allows a user to select the channel that will be ON at power up. To select the default channel press the selected channel switch and hold it for approximately 2 seconds until you hear a beeping sound. -
Page 8: Installing Your Switcher
INSTALLING YOUR SWITCHER Step 1. Make sure that the power input is set to the proper AC voltage in your country. An incorrect setting can result in unit damage not covered by warranty. Step 2. Connect the power cord to the unit and plug it into the power outlet. -
Page 9: Rs-232 Protocol
Reset unit to user defaults [VERN] Returns firmware version numbers Inputs 5 & 6 are not selectable on the MX2414RM Commands must be issued as shown, in ALL CAPS and with the brackets [ ] included in the command string. -
Page 10: Master-Slave Configuration
[OUTmm] This command sets the switcher to respond to specific output only. The default setting is output 1. [SETxnnmm] select input number nn - Minimum input number mm - Maximum input number This command is designed to allow the MX2416RM to program each input to respond to a selected range of input commands. -
Page 11: Manual Loop Control
accommodate this need. The pin-outs for this adapter are as follows: 9 pin “D” Description 9 pin “D” Male Female 1.2K 3.3K 6.8K 0 short Ground The following voltages apply for selecting the required channel: Input number min. (V) nom. (V) 0.35 1.07 1.80... -
Page 12: Accessories
This will setup each switcher as a different output number. To control the switchers use following commands (connect the transmit line from the control system to the receive line on both switchers): [I01O01] Select input number 1 [I02O01] Select input number 2 [I03O01] Select input number 3 [I04O01]... -
Page 13: Power Cables
MX2416RM mounted by itself or two units be rack side by side. The width of the mounted? unit is 1/2 rack wide. Altinex offers rack mount ears for single unit mounting (part# DA1299RM) and rack shelf for two unit mounting (part# DA1298RM). -
Page 14: Altinex Policy
In the unlikely event that an Altinex product needs to be returned please follow the policies below: Altinex will accept product returns for a period of 30 days from authorized Altinex dealers. Products should be returned in an unopened package.
Need help?
Do you have a question about the MX2414RM and is the answer not in the manual?
Questions and answers