Nortel Web OS Switch Software Application Manual page 218

Web OS 10.0 Application Guide
Frames ingressing a port that has been configured with a proxy IP address and the proxy
option enabled (/cfg/slb/port x/proxy ena) can be processed using a proxy IP
address by any switch port. The client source address is substituted with the proxy IP address
of the port processing the request.
Frames ingressing switch ports that have been configured with a proxy IP address, but do not
have the proxy option enabled, is processed by other ports that have been configured with a
proxy IP address; but the client source address will not be replaced with a proxy IP address
before it is forwarded to a server.
>> # /cfg/slb/port 1/pip 10.10.10.10
>> # /cfg/slb/port 1/pip 10.10.10.11/proxy ena
>> # /cfg/slb/port 2/pip 10.10.10.11/proxy dis
>> # /cfg/slb/port 3/pip 10.10.10.12/proxy dis
>> # /cfg/slb/port 4/pip 10.10.10.13/proxy dis
>> # /cfg/slb/port 5/pip 10.10.10.14/proxy dis
and so on....
N
OTE
clean-side switches performing server load balancing (SLB) or URL-based SLB and Direct
Access Mode (DAM) is enabled.
n
218 Chapter 9: Virtual Matrix Architecture
–
VMA must be enabled if you are setting up Firewall Load Balancing (FWLB) with
(Proxy IP for NAT, etc.)
(Turns on address proxying)
(Turns off address proxying)
212777-A, February 2002