1. Introduction
This Application Memory Card guide includes information on the Application
Memory Card for Nokia 9110 and 9110i communicators. On the memory card
there are three pre-installed applications: WAP services, Find, and Quick
imaging.
This Application Memory Card guide includes information on:
• inserting and using the application memory card,
• installing new applications to your communicator and on the memory
card, and
• information on how to use the new applications: WAP services, Find, and
Quick imaging.
You can find these applications on the memory card and on the CD-ROM.
To insert the memory card
First follow these steps to insert the memory card into the communicator:
1 Close the device cover and make sure that the phone is switched off. If it is
on, press
.
2 Remove the communicator battery (if there is an existing card, ensure all
memory card applications are closed from the communicator interface be-
fore removal).
3 Open the hatch at the back of the communicator: carefully open the lid by
easing it up from the ridges on both sides.
4 Insert card into the slot with label facing up and bevelled corner as shown
in figure 1. Make sure that the gold contacts of the card are facing down.
©2000 Nokia Mobile Phones. All rights reserved.
WARNING! Do not try to format the
extra application memory card as this will
destroy all data, including the pre-
installed applications, on your memory
card.
1