Nokia COMMUNICATOR 9110 Software Manual

NOKIA 9110 COMMUNICATOR: REMOTE SYNCHRONISATION OF CALENDAR DATA TO
Calendar data in the Nokia 9110 Communicator can be remotely synchronised to Calendar data in the user' s
PC; i.e. over a data call (TCP/IP connection)
The software package for PC connectivity contains a special module " Intellisync" which allows either local
synchronisation (when the communicator is connected to the computer via cable or IR) or remote
synchronisation (sync via a phone call) of calendar data
Intellisync allows you to configure and run "Remote" as well as "Local-" synchronisations of Calendar data.
A remote synchronisation is a synchronisation that you can run remotely, over a datacall.
Please refer to the communicator User's manual for instructions on operation, care and maintenance, including
important safety information.
Requirements:
A PC connected to the internet (or a LAN)
PC Suite installed and running on that PC
The screensaver must be disabled
PLEASE NOTE: A computer running Intellisync needs to be accessible from the Internet. If it is
behind a firewall, you must have a direct dial-in access to the LAN to be able to connect to the PC
with your Communicator.
PLEASE NOTE: It is advisable to synchronise locally first before synchronising remotely.
A configured Internet access point in the Nokia 9110 Communicator
Data services activated on your GSM subscription. (the SIM card)
Settings:
After installation of PC Suite for the Nokia 9110 Communicator the settings for both local and
remote synchronisation can be set.
Settings for the Intellisync are performed locally when the communicator is connected to the PC
Settings are performed in the same way as with local sync.
Notifications and confirmations cannot be used in the remote synchronisation
Copyright 1995 – 1999 Nokia. All right reserved.
Nokia 9110 Communicator
18.10.99
PC WITH PC SUITE' S INTELLISYNC
1(3)