Table of Contents
Advertisement
The following screen appears:
2. In the User ID field, type the username of the service you have selected
(e.g., your Skype username). Navigate to the Password field using the
down arrow on your handset.
3. In the Password field, type the password of the service you have
selected (e.g., your Skype password).
4. Press Ok using your left soft key.
The VoIP selection screen appears.
If you are interested in adding an additional VoIP service, repeat steps 1
to 4 in this section.
If you have completed selecting VoIP services, press Next using your right
soft key.
The following screen appears as fring signs you into the service:
5. Once the sign-in is complete, the contact list of your fring contacts,
selected VoIP service(s) contacts and the handset's contact list appears.
Note: If you have added more than one VoIP service, the contact list will
display contacts from all services in a single list.
Figure 18 - Define VoIP Service – 2
Figure 19 - VoIP Sign-in
Page
15
Advertisement
Table of Contents
