Itl
INSTALLING
ONTO THE
FLOOR
INSTALLING
HEATER ONTO THE FLOOR
The heater includes plastic legs for its direct installation onto the floor. To assure
a stability of the heater, the mounting
screws described in previous page can be
used to avoid side movements.
As shown in Figure 6, the gas can be placed between the fieater and the floor.
If this appliance
is installed
directly
on carpeting,
light-colored
tile or other
combustible
materia!,
other than wood flooring,
the appliance
shall be installed
on a metal or a wood panel extending
the full width and depth of the appliance.
This protective
panel is not required
a,s a fire-proof
base. The protection
is for
rugs that are extremely
thick and light-colored
tile which may discolor.
FIGURE 6 - Heater directly rested on the floor.
"-4