Table of Contents
Advertisement
INSTALLING
TO WALL
Continued
L
WARNING
Maintain minimum
clearances
shown
in Figure 4. If you can,
provide
greater clearances
from floor
and joining
wall.
INSTALLING
HEATER
TO A WALL
1. Drill two 5/16" holes according to the dimension L shown in figure 5. Insert
two plastic wall anchors into holes. Tighten mounting screws into anchors.
Leave 1/8" space between screw head and anchor.
2. Hang the heater on the two mounting screws. Insert "U" hook into bottom of
cabinet. Mark anchor location through screw hole in "U" hook.
3. Remove heater from wall. Drill another 5/16" hole at marked location. Insert
last plastic wall anchor into hole.
4. Hang heater on wall and place "U" hook in place. Insert mounting screw
through "U" hook and into wall anchor. Tighten screw firmly.
5. Connect gas line to heater.
Note: AII the screws, anchors and hoo_. am furnished with the unit.
Mod. CGRI8PT:
L= (15
114")
388 mm.
Mod. CGR30frI':
L= (22 13/t6")580 mm.
I
m'_n._5
\
"U"HOOK
Left
E
E
E
Front
Opening for combustion air
\
BACK OF HEATER
Manual Shutoff
Valve
Figure
5 - Installing heater to a wall
Advertisement
Table of Contents
