Table of Contents
Advertisement
INSTALLING
TO WALL
Continued
CLEARANCES
Provide adequate clearance around air openings.
Provide for an adequate combustion
and ventilation
air supply.
Accessibility
provisions
must be provided for servicing.
WALL MOUNT
.The heater must be installed no less than 2" above the top surface of carpet_ng,
file, or other floor covering. When facingthe
front of the heater, clearance from
combustibles
must he a minimum of 13" from the left, 13" from the fight, 36"
from the top, and 2" from the bottom. The opening for combustion air located at
the bottom of the heater must not be obstructed.
It must he free of obstacles.
Right side
din FROM WALLS
/
Front
Left side
FLOOR
HEATER
Figure
4 - Mounting
Clearances
For convenience
and efficiency, install heater
where there is easy access for operation,
inspection, and service
•
in coldest part of room
THERMOSTAT
SENSING
BULB
The thermostat
sensing bulb has already been placed at the 1",ottomback of the
heater. It is not necessary
to change its location for proper operation.
m
Advertisement
Table of Contents
